海洋大气环境下装备材料的腐蚀与防护研究进展(4)

[3]MENDOZA A R, CORVO and Indoor Atmospheric Corrosion Of Non-Ferrous Metals[J].Corrosion Science, 2000, 42(7): 1123-1147.

[4]许凤玲, 侯健.光照对高强度低合金钢大气腐蚀的影响研究[J].装备环境工程, 2017, 14(6): 13-16.XU Feng-Ling, HOU on the Effect of Light on Atmospheric Corrosion of High Strength Low Alloy Steel[J].Equipment Environmental Engineering, 2017,14(6): 13-16.

[5]SONG L Y, CHEN Z Y.The role of UV-illumination on·the NaCl-induced Atmospheric Corrosion of Q235 Carbon Steel[J].Corrosion·Science, 2014, 86: 318-325.

[6]CHEN R C, HONG C, LI J J, et Grain Growth and Grain Size Distribution in Isothermal Heat-Treatment of 300m Steel[J].Procedia Engineering,2017, 207: 663-668.

[7]LUO J, LI M Q, LIU Y G, et al.The Deformation Behavior in Isothermal Compression of 300M Ultrahigh-Strength Steel[J].Materials Science and Engineering: A, 2012, 534: 314-322.

[8]刘雨薇, 赵洪涛, 王振尧.碳钢和耐候钢在南沙海洋大气环境中的初期腐蚀行为[J].金属学报, 2020, 56(9): Yu-wei, ZHAO Hong-tao, WANG Corrosion Behavior of Carbon Steel and Weathering Steel in Nansha Marine Atmosphere[J].Acta Metallurgica Sinica, 2020, 56(9): 1247-1254.

[9]CHAN C W, LEE S, SMITH G, et of Wear and Corrosion Resistance of Beta Titanium Alloy by Laser Gas Alloying with Nitrogen[J].Applied Surface Science, 2016, 367: 80-90.

[10]?OMAKLI O, YAZICI M, YETIM T, et of Ti Amount on Wear and Corrosion Properties of Ti-Doped Al2O3 Nanocomposite Ceramic Coated CP Titanium Implant Material[J].Ceramics International, 2018, 44(7):7421-7428.

[11]WANG Y, ZHANG D, LU Mg-Al Layered Double Hydroxide Film on Aluminum: Fabrication and Microbiologically Influenced Corrosion Resistance Properties[J].Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2015, 474: 44-51.

[12]YASAKAU K A, KUZNETSOVA A, KALLIP S, et al.A Novel Bilayer System Comprising LDH Conversion Layer and Sol-Gel Coating for Active Corrosion Protection of AA2024[J].Corrosion Science, 2018, 143:299-313.

[13]宋诗哲, 唐子龙.工业纯铝在3.5%NaCl溶液中的电化学阻抗谱分析[J].中国腐蚀与防护学报, 1996(2): Shi-zhe, TANG Impedance Spectroscopy Analysis of Industrial Pure Aluminum in 3.5% NaCl Solution[J].Journal of Chinese Society for Corrosion and Protection, 1996(2): 127-132.

[14]石强, 张旭强, 孔祥顺, 等.点蚀对镀锌高强钢点焊熔核形成的影响[J].电焊机, 2017, 47(2): Qiang, ZHANG Xu-qiang, KONG Xiang-shun, et of Pitting Corrosion on Nugget Formation in Spot Welding of Galvanized High Strength Steel[J].Electric Welding Machine, 2017, 47(2): 84-87.

[15]郝文魁.海洋工程用E690高强钢薄液环境应力腐蚀行为及机理[D].北京: 北京科技大学, 2015.HAO Stress Corrosion Behavior and Mechanism of E690 High Strength Steel for Offshore Engineering[D].Beijing: University of Science and Technology Beijing, 2015.

[16]颜晨曦, 于洋, 张天翼, 等.含氯环境下温度对2205双相不锈钢点蚀行为的影响[J].材料热处理学报, 2020,41(5): Chen-xi, YU Yang, ZHANG Tian-yi, et of Temperature on Pitting Corrosion Behavior of 2205 Duplex Stainless Steel in Chlorine Environment[J].Transactions of Materials and Heat Treatment | T Mater Heat Treat, 2020, 41(5): 110-117.

[17]VERA R, DELGADO D, ROSALES B M.Effect of Atmospheric Pollutants on the Corrosion of High Power Electrical Conductors: Part and AA6201 Alloy[J].Corrosion Science, 2006, 48(10): 2882-2900.

[18]CAO M, LIU L, YU Z, et Corrosion Behavior of 2A02 Al Alloy under an Accelerated Simulation Marine Atmospheric Environment[J].Journal of Materials Science & Technology, 2019, 35(4): 651-659.

[19]韩凤军, 于宗洋, 许强, 等.2Cr13Mn9Ni4冷作硬化钢板晶间腐蚀[J].金属世界, 2020(1): Feng-jun, YU Zong-yang, XU Qiang, et Corrosion of 2Cr13Mn9Ni4 Cold Work Hardening Steel Sheet[J].Metal World, 2020(1): 37-40.

[20]BOCCHI S, CABRINI M, DURSO G, et Enhanced Intergranular Corrosion of Friction Stir Welded AA2024-T3[J].Engineering Failure Analysis, 2020, 111:.

[21]ZHANG X, ZHOU X, HASHIMOTO T, et Corrosion in AA2024-T351 Aluminium Alloy: Transition From Intergranular Corrosion to Crystallographic Pitting[J].Materials Characterization, 2017, 130: 230-236.

[22]ROBINSON M J, JACKSON N C.The Influence of Grain Structure and Intergranular Corrosion Rate on Exfoliation and Stress Corrosion Crackingof High Strength Al-Cu-Mg Alloys[J].Corrosion Science, 1999, 41(5):1013-1028.

[23]ROBINSON M J.The Role of Wedging Stresses in The Exfoliation Corrosion of High Strength Aluminium Alloys[J].Corrosion Science, 1983, 23(8): 887-899.

[24]ROBINSON M Modelling of Exfoliation Corrosion in High Strength Aluminium Alloys[J].Corrosion Science, 1982, 22(8): 775-790.

[25]WU W, HAO W, LIU Z, et Study of the Stress Corrosion Behavior of A Multiuse Bainite Steel in the Simulated Tropical Marine Atmosphere and Seawater Environments[J].Construction and Building Materials,2020, 239: .

文章来源：《中国腐蚀与防护学报》 网址: http://www.zgfsyfhxb.cn/qikandaodu/2021/0710/895.html